Operation No. 20 - Change Oil In Conveyor Intersecting Axis Gearing - PRONAR T740 Manual

FIGURE 5.16
(1) oil drain plug, (2) oil filler plug
First oil change should be performed after working 50 hours and then after every 500
hours of work.
Check gearing each month for oil leaks and mechanical damage.
5.2.20 OPERATION NO. 20 – CHANGE OIL IN CONVEYOR INTERSECTING AXIS
GEARING
Required service actions
•
Immobilise tractor and trailer with parking brake.
•
Put two wedges behind the wheel, to stop machine rolling.
FRONT GEAR WHEEL TRANSMISSION
5.32