ATTENTION!
Trans-shipment trailer may only be hitched to a tractor, which has the appropriate
connection sockets for braking, hydraulic and electrical, and hydraulic oil in both
machines is the same type and also the tractor hitch is capable of bearing the vertical
drawbar loading of the loaded trailer.
When attaching is completed, secure the electrical leads and hydraulic and braking
system conduits in such a way that they do not become entangled in tractor's moving
parts and are not at the risk of breaking or piercing when making turns.
4.3 TRANS-SHIPMENT TRAILER SUPPORT OPERATION
Setting proper height of drawbar eye in relation to tractor hitch is achieved by the aid of
support with mechanical gearing - figure (4.1).
In order to reduce the force necessary to raise trans-shipment trailer drawbar, place support
crank (3) in position (B). In this position there is greater mechanical gearing leverage, support
foot (2) moves slowly, but little force is necessary to raise the front of the machine.
Raising support
•
Remove safety pin (5).
•
Move support crank from neutral position (A) to position (B).
•
Turn the crank anticlockwise to raise support foot maximally.
•
Place safety pin in position.
•
Place crank in neutral position (A).
4.7