Attaching To Tractor - PRONAR T740 Manual

4.2 ATTACHING TO TRACTOR

Ensure that pneumatic, hydraulic and electric connections and the hitch of agricultural tractor
are according to the Manufacturer's requirements, if not the trans-shipment trailer should not
be hitched to the tractor.
In order to hitch the trans-shipment trailer to the tractor perform the actions below in the
sequence presented. Machine must be immobilised by parking brake.
Connection
•
Position agricultural tractor directly in front of drawbar eye.
•
With the aid of the support regulate the height of the drawbar with regard to the
hitch of the tractor.
•
Reverse tractor, hitch trans-shipment trailer, check hitch lock protecting
machine against accidental unhitching.
•
Turn off tractor ignition.
•
Raise support foot upwards, secure it with pin, move crank to central position
(neutral position).
•
Connect pneumatic system conduits (applies to two conduit systems):
•
Connect pneumatic system conduits (applies to single conduit systems):
•
Connect main conduit supplying electric lighting system and conduit supplying
vertical conveyor auxiliary lamp.
•
Place electronic counter in tractor operator cab, connect counter to cigarette
lighter power supply.
•
Connect hydraulic turning interlock system conduit (blue).
•
Connect two conduit slide and conveyor system (red).
Connect pneumatic conduit marked yellow with yellow socket in tractor.
Connect pneumatic conduit marked red with red socket in tractor.
Connect pneumatic conduit marked black with black socket in tractor.
4.5