Operation No. 17 - Inspection Of Tightness Of Front Chain Transmission (Ii Stage) - PRONAR T740 Manual

•
After achieving required tightness, tighten counter nut (4).
FIGURE 5.13 I STAGE OF FRONT CHAIN GEARING
(1) chain, (2) tensioner toothed cog, (3) tensioner bolt, (4) counter nut, (5) tightening nut
Check drive chain tightness of the I stage of transmission gear:
•
every 10 hours of work - before greasing chain.
5.2.17 OPERATION NO. 17 – INSPECTION OF TIGHTNESS OF FRONT CHAIN
TRANSMISSION (II STAGE)
5.28