CEStronics OMEGA FLEX Assembly And Operating Manual page 44

8.7 Opening modes of the locking devices
8.7.3 Simultaneous activation of multiple opening modes
An opening mode remains enabled until it is disabled by the appropriate master medium or until the time
set for the time profile has expired. Office mode is enabled by locking media and automatically disabled if
block mode, release mode, emergency mode or a block time profile or enable time profile is activated.
For opening modes that have been activated by master media the following applies: Activation of a further
opening mode does not disable the current mode. Different opening modes can therefore overlap, provided
that the hierarchy permits this (see
opening mode can be activated in addition to an already-active opening mode, the new opening mode must
have a higher hierarchy level than the current opening mode.
Example: You initially place a locking device into release mode and then into block mode, without
deactivating release mode. After this, block mode is active. If you now deactivate block mode, the locking
device returns to release mode. If you deactivate release mode with the Release-Master, the device
returns to normal mode.
Page 44 of 84
"Hierarchy of opening modes" on the previous page). To ensure an
RFID furniture lock