9.5 Battery replacement
9.5.2 Signals after batteries are inserted
Signal
Page 50 of 84
5. Slide the battery strip into the housing.
6. Insert the battery compartment cover.
7. Tighten the screw of the battery compartment cover.
The furniture lock is ready for operation.
Meaning
Start sequence for offline locking devices (no errors):
1x
rot
Bootloader is loading
1x
green
Firmware loaded successfully
Error in start sequence:
flashes red
Firmware error
Perform a firmware update. If it is not possible to eliminate the error, please contact your
CEStronics partner.
If a system error is present, it will be displayed immediately after the start sequence.
RFID furniture lock