CEStronics OMEGA FLEX Assembly And Operating Manual page 53

11.1.2 Deleting lost master media
If you have lost the System-Master, you cannot delete the System-Master. Contact your CEStronics
partner immediately.
Deleting the System-Master has the following consequences:
All master media are deleted.
l
All authorisations issued by Program-Masters are deleted.
l
The locking device is reset to normal mode, i.e. all active opening modes (e.g. block mode) are deac-
l
tivated.
The following settings are retained after deletion:
Settings implemented with the OMEGA Client (e.g. time profiles, locking device authorisations, etc.)
l
are retained.
Opening durations set with the Time-Master are retained.
l
Online devices remain in online mode.
l
11.1.2.1 Effect of deletion on opening modes
If you delete a master medium that can put a locking device into a different opening mode, the mode of the
locking device is retained after the deletion.
Exceptions: Deletion of the System-Master puts the locking devices back into normal mode.
Example: The locking device is in block mode. You delete the Block-Master from the locking device. After
deletion, the locking device will still be in block mode.
RFID furniture lock
If you are not using the CEStronics Suite software:
If you are only managing your system with master media and have
lost a master medium, you can no longer delete this specific master
from the locking devices. You must therefore(see
System-Master" on page 64).
If you are using the CEStronics Suite software:
You can delete individual master media from the locking devices using
OMEGA Client.
Detailed instructions can be found in the CEStronics Suite
Help.
11.1 Loss of a master medium
"Deleting the
Page 53 of 84