CEStronics OMEGA FLEX Assembly And Operating Manual page 78

13.9 Checking the quality of the wireless connection
Steps
1. Hold the RF-Trace-Master in the reading field of the locking device for approx. 1 second.
The RF-Trace-Master is accepted.
2. The locking device now indicates the quality of the wireless connection:
During testing, the Access-Point linked to the locking device uses the same signals
to indicate the quality of the wireless connection.
3. Hold the RF-Trace-Master in the reading field for approx. 1 second.
Testing and signalling of the wireless connection quality is complete.
The testing and signalling of the wireless connection quality is automatically
terminated after 3 minutes.
Troubleshooting:
Signal
After step 1:
1x long red
Page 78 of 84
Excellent
Adequate
Weak
No wireless connection
Cause
The locking device is not a NET or VA
variant.
Signal
1x short green
1x long green
Solution
The RF-Trace-Master can only be used with NET and
VA devices.
RFID furniture lock