Functions Of Omega Flex Systems - CEStronics OMEGA FLEX Assembly And Operating Manual

8.2 Functions of OMEGA FLEX systems

8.2 Functions of OMEGA FLEX systems

OMEGA FLEX systems offer many functions that cannot be provided by mechanical master key systems.
Which functions are available in your OMEGA FLEX system depends on the licence you obtain, the operating
mode (LINE or V-NET) and the type of administration.
Opening duration

The actuation time is the length of time that the locking device remains engaged after an
authorized locking medium has been held in the reading field of the locking device.
The longer the actuation time, the more time persons have to actuate the locking device after
authentication with a locking medium. The maximum actuation duration is 180 seconds.
The opening duration can be set by means of the master media (see
time" on page 70) and via the CEStronics Suite (Detailed instructions can be found in the
CEStronics Suite Help.).
Release mode and block mode

A locking device in release mode remains constantly coupled, i.e. the door can be opened at
any time without having to use a locking medium.
A locking device in block mode remains constantly uncoupled, i.e. the door cannot be opened.
Access is no longer possible, even with authorised locking media.
Details on this and other opening modes can be found in
devices" on page 43.
Release and block modes are set by means of master media (see
media" on page 57 and
Time profiles

There are three types of time profiles:
1. Enable time profiles (up to three time windows for each weekday plus one special day
during which the locking device is released, i.e. can be opened at any time)
2. Block time profiles (up to three time windows per weekday plus one special day during
which the locking device is blocked, i.e. cannot be opened)
3. Up to 29 individual time profiles (each time profile has up to three time windows per
weekday plus one special day; a locking medium is only authorised to open the locking
device at the times set in the profiles)
Time profiles are set in the CEStronics Suite. Detailed instructions can be found in the
CEStronics Suite Help.
Page 32 of 84
"Block mode" on page 71).
"Setting the actuation
"Opening modes of the locking
"Overview: Use of master
RFID furniture lock