CEStronics OMEGA FLEX Assembly And Operating Manual page 59

Steps
1. Hold the System-Master for approx. 1 second in the reading field of the locking device and
then remove it.
The System-Master has been accepted.
2. Hold the System-Master once again for approx. 1 second in the reading field of the locking
device and then remove it.
The System-Master is now authorised for this locking device.
Troubleshooting:
Signal
After step 1:
4x short red
After step 2:
1x short red
RFID furniture lock
Cause Solution
The System-Master Use the System-Master with the correct system number.
does not have the
correct system
number.
Another System- Since, at any given time only one System-Master exists
Master has already that can be authorised on the basis of its unique system
been authorised for number for a locking device, there is reason to suspect
this locking device. manipulation. Contact your CEStronics partner
immediately.
13.1 Authorising the System-Master
Signal
1x short green
1x long green
Page 59 of 84