CEStronics OMEGA FLEX Assembly And Operating Manual page 20

6.2 Assembly
6.2.2 Preparing the RFID furniture lock for installation
Aligning the knob based on the installation direction is recommended. CES recommends positioning the
knob such that it is vertical in the open position (see illustration) and horizontal in the closed position.
The following shows the conversion from a vertical to a horizontal installation position with the knob on the
left.
Page 20 of 84
1. Loosen the fixing screw on the knob.
2. Remove the knob and rotate it to what will in future be the
open position.
3. Press and hold the knob against the housing.
4. Retighten the fixing screw (max. 3 Nm).
The knob has now been successfully repositioned.
RFID furniture lock