CEStronics OMEGA FLEX Assembly And Operating Manual page 24

6.2 Assembly
6.2.4 Inserting the battery pack
Use the battery change tool supplied for inserting or removing the cable connector. Do not use any
other objects.
Use only original battery packs from CES (assembled battery pack; 3 V; with 2x AAA Energizer
Ultimate Lithium batteries).
Page 24 of 84
1. Slide the battery connector into the battery change tool in
such a way that the coloured markings on the battery change
tool match the colour of the cable.
2. Position the battery connector over the socket in the housing.
3. Guide the battery connector into the socket by carefully
pulling the battery change tool forwards.
4. Slide the battery pack into the housing.
RFID furniture lock