6.2 Assembly
Tools required:
Tool
Hexolobular socket TX6
Hexolobular socket TX8
Hexolobular socket TX20
Open-ended spanner SW 24
Open-ended spanner SW 10
6.2.1 Preparing the cabinet/compartment door for installation
RFID furniture lock
Required for:
Battery compartment cover screw
To adjust the knob position
Bottom housing mounting
Top housing mounting
Fixing screw for locking cam
1. Remove the existing cabinet/compartment lock, if present.
2. Check whether the existing drilled holes match the required
hole pattern.
3. If necessary, drill additional holes based on the drilling
template. Note the intended installation direction.
6.2 Assembly
Page 19 of 84