About The Rfid Furniture Lock - CEStronics OMEGA FLEX Assembly And Operating Manual

4 About the RFID furniture lock

The RFID furniture lock is an electronic handle set that can be fitted or retrofitted to
cabinet and compartment doors. Depending on the version, the RFID furniture lock
engages mechanically using a lever or espagnolette lock*. It is operated by means of
a knob. The knob can only be used to lock or open the door if an authorised locking
medium has first been held up to it. The RFID furniture lock is mounted on the
outer side of the door.
For use in an OMEGA FLEX system, a licence extension is required (furniture lock
module, art. no. 350120).
Installation positions
The RFID furniture lock can be mounted either horizontally or vertically. Aligning
the knob based on the installation direction is recommended. CES recommends
positioning the knob so that it is vertical in the open position (see illustration) and
horizontal in the closed position.
Operating modes
The RFID furniture lock offers several operating modes. You can change from one
mode to another by means of RF programming.
All-Open
One-Open
(Standard setting)
* Suitable for espagnolette locks with 7 mm square spindle.
RFID furniture lock
3.3 Which system components are included in the OMEGA FLEX?
Any locking medium authorised by the associated master
key system can open and close the furniture lock.
Any medium authorised by the associated master key
system can lock one or more furniture locks. Only that same
medium can subsequently reopen the locked furniture lock.
Page 13 of 84