6.2.3 Assembling the RFID furniture lock
The RFID furniture lock is available in two versions (with a lever or with a square spindle for espagnolette
locks). Assembly varies according to the version.
6.2.3.1 Mounting the RFID furniture lock with a lever
Overtightening the fixing screws can result in warping/twisting thus damaging the coupling
mechanism. The fixing screws should be tightened only to a maximum torque of 3 Nm.
RFID furniture lock
1. Insert the furniture lock into the holes.
2. Tighten the nuts (max. 3 Nm).
3. Adjust the directional washer for the required direction of
rotation.
6.2 Assembly
Page 21 of 84