CEStronics OMEGA FLEX Assembly And Operating Manual page 46

9.4 Battery management
9.4 Battery management
9.4.1 Battery consumption
Battery consumption depends on various factors including the following:
Ambient temperature Battery consumption increases at low ambient temperatures.
Beeper Battery consumption increases when the beeper is on.
Actuation The more frequently the device is actuated, the higher the battery consumption.
Examples of battery life
Usage profile of RFID furniture lock
Standby without access
Standby and up to 10 accesses per day
Max. Number of locks per battery pack
*The information is valid at 20 ° C. Deviating temperatures, the type of use and the parameterization of the locking devices can lead to
strongly deviating values.
9.4.2 Battery warning system
When the battery output falls, the locking device displays additional signals when
authorised or unauthorised locking media have been held in the reading field of the locking device or
l
the locking device couples, e.g. after release mode or emergency mode was activated.
l
These additional signals are the battery warnings.
If you use the OMEGA Client software, you can have battery warnings sent to you automatically as e-mail
messages.
Detailed instructions can be found in the CEStronics Suite Help.
Battery warning levels
When the batteries are flat, the door can no longer be locked. Replace the battery immediately after
warning level 1.
Warning level Battery warning signal
1 1x long red
Page 46 of 84
Battery life*
up to 2,4 Jahre
up to 1,8 Jahre
up to 32.000
Cause Action required
Battery capacity low Replace the battery immediately
RFID furniture lock