Wi-Fi Installation With Mini Extender - Verizon CR1000A User Manual

2.1a/

Wi-Fi Installation with Mini Extender

1. Place the Mini Extender in an area between the Router and
an area with spotty Wi-Fi coverage.
2. Connect the power plug of the Extender to an electrical
outlet. Once the Extender is plugged in, the light should turn
solid yellow within a few minutes.
3. To activate the WPS function, press and hold the WPS
buttons of your Mini Extender and the Verizon Router for
more than two seconds. When WPS is initiated from your
router, the Status LED slowly flashes blue for up to two
minutes, allowing time to complete the WPS pairing process
on your Extender. When the Extender begins connecting to
your router using WPS, the Status LED slowly flashes blue
for a few seconds, and turns rapidly blue and then solid
white as the connection completes. If the Mini Extender
does not flash blue during the pairing process and returns to
solid yellow, then unplug the device and move it closer to the
router and attempt to pair the devices again.
02 / CONNECTING YOUR
VERIZON ROUTER
©2021 Verizon. All Rights Reserved
30