Dmz Host - Verizon CR1000A User Manual

FiREWaLL
2. To add a service as an active protocol, enter the application
name, configure its inbound and outbound (triggered/
forwarded) port range, then select the protocol.
3. To schedule the rule, select either Always
the Schedule Schedule list box.
4. Click Add to list Add to list. The rule displays in the Rules List
5. Click Apply changes Apply changes to save changes.
6.0f/

DMz HOST

DMZ Host allows a single device on your primary network to be
fully exposed to the internet for special purposes like internet
gaming.
Warning: Enabling DMZ Host is a security risk. When a device
on your network is a DMZ Host, it is directly exposed to the
internet and loses much of the protection of the firewall. If it is
compromised, it can also be used to attack other devices on your
primary network.
Follow these steps to designate a device on your primary network
as a DMZ Host:
1. From the Advanced
DMZ Host. DMZ Host
2. Select Enable Enable for the DMZ Host.
3. Enter the IP address or select the MAC address of the
device you want to designate as the DMZ Host.
4. Click Apply changes Apply changes to save changes.
Advanced menu, select Firewall
Always or User Defined User Defined in
Rules List section.
Firewall and then click