BaSiC SEttingS
To set Wi-Fi MAC authentication:
1.
To setup access control, click on the Edit List
2.
Enter the MAC address of a device and click Add new
device
device.
3.
Select either:
•
Allow access to all devices
Allow access to all devices – allows the listed devices to
access the Wi-Fi network.
Warning:
This will block Wi-Fi network access for all devices not
in the list. Only devices in the list will be able to connect to the
Wi-Fi network.
•
Deny access to all devices – denies access to the listed
Deny access to all devices
devices. All other Wi-Fi devices will be able to access the
Wi-Fi network if they use the correct Wi-Fi password.
4.
Repeat step 2 and step 3 to add additional devices, as
needed.
5.
When all changes are complete, click Apply changes
the changes.
Edit List.
Add new
Apply changes to save