Static Wan With Lan Ipv6 Stateless Settings - Verizon CR1000A User Manual

• Subnet ID - set the site topology for your internal site Subnet ID
• Router Advertisement Lifetime Router Advertisement Lifetime (minutes between 0-150)
• IPv6 Address Lifetime IPv6 Address Lifetime (minutes between 3-150)
• Option: Allow ICMPv6 Echo Request for LAN devices Option: Allow ICMPv6 Echo Request for LAN devices
using their Global IPv6 Address from WAN side using their Global IPv6 Address from WAN side -
requesting an IPv6 address from any available DHCPv6
servers available on the ISP
3. After entering all appropriate IPv6 settings, click Apply
changes changes to have changes take effect.

Static WaN with LaN IPv6 Stateless Settings

1. To configure IPv6 LAN Stateless mode with Static
select the Stateless
page as shown below:
Stateless option on the IPv6 Configuration Control
06 / CONFIGURING
ADVANCED SETTINGS
Apply
Static WAN,
IPv6 Configuration Control
©2021 Verizon. All Rights Reserved
140