Verizon CR1000A User Manual page 26

8. You can optionally enable the 6 GHz Wi-Fi
the selection to On
6 GHz will modify the existing 2.4 & 5 GHz security from
WPA2 to WPA2/WPA3 and 6 GHz will be enabled using
WPA3. You can continue to use one Wi-Fi Name and
Password across all Wi-Fi bands.
The IoT Wi-Fi will also be enabled for any devices that do
not support WPA3, and this will use a unique Wi-Fi name and
password based on the default SSID & Password. Devices on
this Wi-Fi will be able to communicate with other devices on
the Primary network with no firewall restrictions separating
them.
9. Click Continue Continue to review your settings.
10. The Apply Wi-Fi changes Apply Wi-Fi changes screen is displayed. Review your
current settings. You may optionally save your settings
as an image on your device by selecting the button, Save
as Image. Click Apply as Image
Verizon Router.
6 GHz Wi-Fi band by toggling
On. Review the notification that enabling
Apply to save the Wi-Fi changes to your
02 / CONNECTING YOUR
VERIZON ROUTER
©2021 Verizon. All Rights Reserved
26
Save