Lan Ipv6 Stateless With No Wan Settings - Verizon CR1000A User Manual

• Option: Allow ICMPv6 Echo Request for LAN devices Option: Allow ICMPv6 Echo Request for LAN devices
using their Global IPv6 Address from WAN side using their Global IPv6 Address from WAN side -
requesting an IPv6 address from any available DHCPv6
servers available on the ISP
3. After entering all appropriate IPv6 settings, click Apply
changes to have changes take effect. changes

LaN IPv6 Stateless with No WaN Settings

1. To configure IPv6 LAN Stateless mode with No WAN
connection, select the Stateless
Configuration Control Configuration Control page as shown below:
2. Specify the settings to be used to assign LAN IPv6
addresses by entering the following details:
• IPv6 LAN Configuration (select Stateless from the IPv6 LAN Configuration
dropdown list)
Stateless option on the IPv6
©2021 Verizon. All Rights Reserved
06 / CONFIGURING
ADVANCED SETTINGS
148
Apply
IPv6