Verizon CR1000A User Manual page 136

2. Select Enable Enable in the Enable IPv6 Support
enabled the default setting will be IPv6 WAN as DHCPv6 and
IPv6 LAN as Stateless).
3. Select the appropriate IPv6 connection method from the
dropdown list (DHCPv6 or Static) to specify the method to
be used to obtain your WAN IPv6 Address.
4. Click Apply changes Apply changes to have changes take effect.
Note: The Internet IPv6 service is required for this feature to
work over the internet.
5. To disable the IPv6 service, click on the Disable
Enable IPv6 Support field. Enable IPv6 Support
6. Click Apply changes Apply changes to have changes take effect.
Enable IPv6 Support field. (Once IPv6 is
©2021 Verizon. All Rights Reserved
06 / CONFIGURING
ADVANCED SETTINGS
Disable option in the
136