nEtWoRk SEttingS
6.2i/
PORT CONFIGURaTION
Ethernet port configuration allows you to set up the Ethernet ports
as either full- or half-duplex ports, at either 10 Mbps, 100 Mbps, or
1000 Mbps.
To configure the ports:
1.
Select Port Configuration
Port Configuration in the Network Settings
2.
To emulate the speed and duplex configuration of the port
with which it's communicating, select Auto
speed and duplicity.
3.
Click Apply changes
Apply changes to save changes.
Network Settings section.
Auto or select the port