Lan Connection Failure - Verizon CR1000A User Manual

For additional information regarding the Restore Defaults feature,
refer to section 6.1/ Utilities/Save And Restore.
• Using the tip of a ballpoint pen or pencil, press and hold the
Reset button on the back of your Verizon Router for three
seconds.
• Access the UI and navigate to the Advanced Settings page.
Select the 6.1b Save and Restore option. After saving your
configuration, if desired, click the Restore Factory Defaults radio
button. For additional details, refer to the 6.1/ Utilities/Save And
Restore section of this guide.
Note: If you reset or reboot your Verizon Router, you may also need
to disconnect your Verizon Router's power supply for a few minutes
(3 or more) and then reconnect the power cable. However, in order
to provide full synchronization to the coaxial network, disconnecting
and reconnecting the power may be required.
7.0e/

LaN CONNECTION FaILURE

To troubleshoot a LAN connection failure:
• Verify your Verizon Router is properly installed, LAN connections
are correct, and that the Verizon Router and communicating
network devices are all powered on.
• Confirm that the computer and Verizon Router are both on the
same network segment.
If unsure, let the computer get the IP address automatically by
initiating the DHCP function, then verify the computer is using
07 / TROUBLESHOOTING
©2021 Verizon. All Rights Reserved
180