Static - Wan Ipv6 Address Connection - Verizon CR1000A User Manual

nEtWoRk SEttingS
Once configured using valid IPv6 WAN and LAN configurations, you
should not see any errors when you click on the Apply changes
button and the Status
router's new IPv6 address.
You should also see the IPv6 address for all IPv6 supported
devices on your local network displayed on the Basic
Devices Devices page by selecting Expanded List

Static - WaN IPv6 address Connection

The IPv6 WAN Static configurations are IPv6 settings that you
enter manually. These specific IPv6 addresses and settings are not
expected to change frequently.
1. To configure IPv6 WAN Static mode, select the Static
on the IPv6 Configuration Control IPv6 Configuration Control page as shown below:
Status page on the main menu will reflect the
Expanded List from the dropdown list.
Apply changes
Basic/Devices Devices/
Static option