Verizon CR1000A User Manual page 37

ComputER nEtWoRk ConFiguRation
To access WPS using the user interface:
1. From the Basic
Wi-Fi Protected Setup Wi-Fi Protected Setup.
2. Enable the protected setup by moving the selector to on
3. Use one of the following methods:
• If your Wi-Fi client device has a WPS button, press the
WPS button on your router for more than two seconds,
then click the start WPS
the WPS registration process.
• If your client device has a WPS PIN, locate the
PIN printed on the client's label or in the client
documentation. Enter the PIN number in the Enter PIN
field. The Client WPS PIN
on the user interface.
• Click Register
Basic menu, select Wi-Fi
start WPS button in the Option 1
Client WPS PIN field is located in the Option 2
Register.
Wi-Fi settings, then click
Option 1 to start
on.
Enter PIN
Option 2