Wired Installation With Fios Extender - Verizon CR1000A User Manual

5. Unplug and move the extender to an area between the router
and an area with spotty Wi-Fi coverage. Once the extender is
plugged in, the light should turn solid white again within a few
minutes.
You're all set! Your devices will connect automatically with the same
Wi-Fi network name and password as your Verizon Router.
2.1c/

Wired Installation with Fios Extender

1. Connect the Verizon Router to a coax outlet. (If the coax
outlet is already in use, use a coax splitter.)
2. Connect the extender to a coax outlet — ideally in an area
with spotty Wi-Fi coverage.
3. Connect the power cords to your router and extender then
to an electrical outlet.
4. After 10 minutes, the light on the extender should turn solid
white, indicating the connection is complete.
Note: If using Ethernet wiring, follow the same steps as above
with an Ethernet cable instead of a coax cable.
You're all set! Your devices will connect automatically with the same
Wi-Fi network name and password as your Verizon Router.
02 / CONNECTING YOUR
VERIZON ROUTER
©2021 Verizon. All Rights Reserved
32