Verizon CR1000A User Manual page 88

In this case, port triggering must be used since it conflicts with the
following default firewall settings:
• Firewall blocks inbound traffic by default.
• Server replies to your Verizon Router IP, and the connection is
not sent back to the host since it is not part of a session.
To resolve the conflict, a port triggering entry must be defined,
which allows inbound traffic on UDP port 3333 only after a network
host generated traffic to UDP port 2222. This results in your
Verizon Router accepting the inbound traffic from the gaming
server and sending it back to the network host which originated the
outgoing traffic to UDP port 2222.
To configure port triggering:
1. From the Advanced
Triggering. Triggering
Advanced menu, select Firewall
06 / CONFIGURING
ADVANCED SETTINGS
Firewall and then click Port
©2021 Verizon. All Rights Reserved
88
Port