Verizon CR1000A User Manual page 116

– Automatic: sets the MTU (Maximum Transmission Automatic
Unit) at 1500.
– Automatic by DHCP Automatic by DHCP: sets the MTU according to the
DHCP connection.
– Manual Manual: allows you to manually set the MTU.
• Internet Protocol Internet Protocol
In the Internet Protocol section, specify one of the
following:
– No IPv4 Address: the connection has no IP address. No IPv4 Address
This is useful if the connection operates under a
bridge.
– Obtain an IPv4 Address Automatically Obtain an IPv4 Address Automatically: the network
connection is required by Verizon to obtain an IP
address automatically. The server assigning the IP
address also assigns a subnet mask address, which
can be overridden by entering another subnet mask
address.
– Use the Following IP Address: the network connection Use the Following IP Address
uses a permanent or static IP address
Mask address, provided by Verizon or experienced Mask
network technician.
06 / CONFIGURING
ADVANCED SETTINGS
IP address and Subnet
©2021 Verizon. All Rights Reserved
116
Subnet