Lan Ipv6 Configuration Without An Ipv6 Wan Connection - Verizon CR1000A User Manual

nEtWoRk SEttingS
2. Specify the settings to be used to assign LAN IPv6
addresses by entering the following details:
• IPv6 LAN Configuration IPv6 LAN Configuration (select Stateless from the
dropdown list)
• LAN Prefix LAN Prefix (automatically populated)
• IPv6 LAN Address (automatically populated) IPv6 LAN Address
• LAN Link Local Address LAN Link Local Address (automatically populated)
• Subnet ID Subnet ID - set the site topology for your internal site
• Router Advertisement Lifetime Router Advertisement Lifetime (minutes between 0-150)
• Option: Allow ICMPv6 Echo Request for LAN devices Option: Allow ICMPv6 Echo Request for LAN devices
using their Global IPv6 Address from WAN side using their Global IPv6 Address from WAN side -
requesting an IPv6 address from any available DHCPv6
servers available on the ISP
3. After entering all appropriate IPv6 settings, click Apply
changes to have changes take effect. changes

LaN IPv6 Configuration without an IPv6 WaN Connection

1. To configure IPv6 to use either the IPv6 LAN Stateful
or Stateless mode without using an IPv6 Internet
WAN connection, select the None
Configuration Control Configuration Control page.
None option on the IPv6
Apply
IPv6