Coax Link - Verizon CR1000A User Manual

nEtWoRk SEttingS
2. Configure the following settings, as needed.
General
Verify the following information:
• Status Status - displays the connection status of the network.
• Network Network – displays the type of network connection.
• Connection Type Connection Type - displays the type of connection
interface.
• Physical Address - displays the physical address of the Physical Address
network card used for the network.
• MTU - specifies the largest packet size permitted for MTU
internet transmissions:
– Automatic Automatic: sets the MTU (Maximum Transmission
Unit at 1500).

Coax Link

• Privacy - Privacy - to set Privacy
This causes all devices connected to the coaxial cable to
use the same password. This is recommended. To set the
password, enter the Coax Link password in the Manual
entry of privacy password field. entry of privacy password
• To enable or disable the Coax link, click Enable
Disable. Disable
• To view the devices connected using the coaxial cable,
click the Go to LAN Coax Status
3. Click Apply Apply to save changes.
Privacy, select the Enabled
Go to LAN Coax Status link.
Enabled check box.
Manual
Enable or