Verizon CR1000A User Manual page 78

• ARP Table – displays active devices with their IP and MAC
addresses.
• NDP (Neighbor Discovery Protocol) Table – displays active
devices with their IPv6 and MAC addresses of DHCP
connection.
• Users – creates and manages remote users.
• Remote Administration – enable remote configuration of your
Verizon Router from any internet-accessible computer.
• LED Brightness - controls the Router Status LED light to either
dim or brighten and sets the dimming time of the LED light.
Network Settings Network Settings
• Network Objects – defines a group, such as a group of
computers.
• Network Connections – displays and manages the details of a
specific network connection.
• Universal Plug and Play (UPnP) – checks the validity of all UPnP
services and rules.
• Port Forwarding Rules – displays port forwarding rules.
• IPv6 – enables IPv6 support.
• Routing – manages the routing and IP address distribution rules.
• IPv4/IPv6 Address Distribution - adds computers configured as
DHCP clients to the network.
• Port Configuration – sets up the Ethernet ports as either full- or
half-duplex ports, at either 10 Mbps, 100 Mbps, 1000 Mbps or
10 Gigabit.
06 / CONFIGURING
ADVANCED SETTINGS
©2021 Verizon. All Rights Reserved
78