Iot Network - Verizon CR1000A User Manual

2. Move the selector to on
3. If desired, enter a new name and password for the
Wi-Fi network or leave the default name and password that
displays automatically.
4. Press Apply changes Apply changes to save the changes.
Important: It is not recommended to create a guest network
without a password.
3.1c/

IOT NETWORk

The router supports connection of multiple IoT devices on a
separate WiFi SSID. The IoT Network is designed to provide an
easier setup experience for your Internet of Things (IoT) devices
which benefit from connecting to the 2.4 GHz band while keeping
your Primary Network settings unchanged. IoT devices and Primary
devices can communicate with no firewall restrictions separating
them.
The Verizon Router is shipped from the factory with IoT Wi-Fi
turned off. The default SSID for IoT Wi-Fi is preconfigured at the
factory to the default Wi-Fi network name (SSID) which is displayed
on a sticker located at the rear of the router followed by hyphen IoT
(-IoT). For example – if the router is shipped with a default SSID of
"Verizon-ABCDE" then the default SSID for IoT
Wi-Fi is "Verizon-ABCDE-IoT".
on.
©2021 Verizon. All Rights Reserved
03 / WI-FI SETTINGS
53