Jeep WRANGLER 2020 Owner's Manual page 57

Recirculation Button
Press and release this button on the
touchscreen, or push the button on
the faceplate, to change the system
between recirculation mode and
outside air mode. The Recirculation indicator
and the A/C indicator illuminate when the
Recirculation button is pressed. Recirculation
can be used when outside conditions, such as
smoke, odors, dust, or high humidity are
present. Recirculation can be used in all modes.
Recirculation may be unavailable (button on the
touchscreen greyed out) if conditions exist that
could create fogging on the inside of the
windshield. The A/C can be deselected
manually without disturbing the mode control
selection. Continuous use of the Recirculation
mode may make the inside air stuffy and
window fogging may occur. Extended use of this
mode is not recommended.
In cold weather, use of Recirculation mode may
lead to excessive window fogging.
AUTO Button
Set your desired temperature and
press and release the AUTO button on
the touchscreen, or push the button
on the faceplate. AUTO will achieve
and maintain your desired temperature by
automatically adjusting the blower speed and
air distribution. AUTO mode is highly
recommended for efficiency. You can press and
release this button on the touchscreen, or push
the button on the faceplate, to turn AUTO on.
The AUTO indicator illuminates when AUTO is
on. Toggling this function will cause the system
to switch between manual mode and automatic
mode Ú page 59.
Front Defrost Button
Press and release this button on the
touchscreen, or push and release the
button on the faceplate, to change
the current airflow setting to Defrost
mode. The Front Defrost indicator illuminates
when Front Defrost is on. Air comes from the
windshield and side window demist outlets.
When the defrost button is selected, the blower
level may increase. Use Defrost mode with
maximum temperature settings for best
windshield and side window defrosting and
defogging. When toggling the front defrost
mode button, the climate system returns to the
previous setting.
GETTING TO KNOW YOUR VEHICLE
Rear Defrost Button
Press and release the Rear Defrost
button on the touchscreen, or push
and release the button on the
faceplate, to turn on the rear window
defroster and the heated outside mirrors (if
equipped). The Rear Defrost indicator
illuminates when the rear window defroster is
on. The rear window defroster automatically
turns off after 10 minutes.
CAUTION!
Failure to follow these cautions can cause
damage to the heating elements:
Use care when washing the inside of the

rear window. Do not use abrasive window
cleaners on the interior surface of the
window. Use a soft cloth and a mild
washing solution, wiping parallel to the
heating elements. Labels can be peeled off
after soaking with warm water.
Do not use scrapers, sharp instruments, or

abrasive window cleaners on the interior
surface of the window.
Keep all objects a safe distance from the

window.
55
2