Jeep WRANGLER 2020 Owner's Manual page 217

Setting Name
Forward Collision Warning Sensitivity — Located In Automatic Emergency
Braking Submenu
ParkSense — If Equipped
Front ParkSense Volume — If Equipped
Rear ParkSense Volume — If Equipped
Blind Spot Alert
Hill Start Assist
ParkView Backup Camera Delay — If Equipped
Description
This setting will change the distance at which the Forward Collision
Warning alert sounds. The "Medium" setting will have the FCW system
signal when an object is in view, and the possibility of a collision is
detected. The "Near" setting will have the FCW system signal when the
object is closer to the vehicle. The "Far" setting will have a FCW system
signal when an object is at a far distance from the vehicle.
This setting will change the type of ParkSense alert when a close object
is detected and provide both an audible chime and a visual display.
This setting adjusts the volume of the Front ParkSense system. The
available settings are "Low", "Medium", and "High".
This setting adjusts the volume of the Rear ParkSense system. The
available settings are "Low", "Medium", and "High".
This setting will change the type of alert provided when an object is
detected in a vehicle's blind spot. The "Off" setting will turn off Blind
Spot Alert. The "Lights" setting will activate the Blind Spot Alert lights on
the outside mirrors. The "Lights & Chime" setting will activate both the
lights on the outside mirrors and an audible chime.
This setting will turn the Hill Start Assist system on or off.
This setting will add a timed delay to the ParkView Backup Camera
when shifting out of REVERSE.
MULTIMEDIA 215
5