Engine Fluids And Lubricants - Jeep WRANGLER 2020 Owner's Manual

424 TECHNICAL SPECIFICATIONS

ENGINE FLUIDS AND LUBRICANTS

Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of the Scheduled Servicing
Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission specifications. Lubricant quality is crucial for engine
operation and duration. If lubricants conforming to the specific request are not available, products that meet the indicated specifications can be used
to top up, in this case optimal performance of the engine is not guaranteed.
Engine Coolant
Intercooler – If Equipped
Engine Oil — 2.0L Gasoline Engine
Engine Oil — 3.6L Gasoline Engine
Component Fluid, Lubricant, or Genuine Part
We recommend you use PARAFLU
Technology) or equivalent meeting the requirements of the manufacturer
Material Standard MS.90032.
We recommend you use PARAFLU
Technology) or equivalent meeting the requirements of the manufacturer
Material Standard MS.90032.
We recommend you use Mopar® API SP/GF-6A Certified SAE 5W-30 Full
Synthetic Engine Oil which meets the requirements of the manufacturer
Material Standard MS-13340. Equivalent full synthetic SAE 5W-30
engine oil can be used if it meets API SP/GF-6A Certification. If API SP/
GF-6A or equivalent oil is unavailable then please contact a local
dealership for recommendation.
Failure to use the recommended API SP/GF-6A or equivalent oil can
cause engine damage not covered by the vehicle warranty.
We recommend you use SELENIA K POWER 0W-20, or equivalent, 0W-20
Engine Oil, meeting the requirements of the manufacturer Material
Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade.
UP
Formula OAT (Organic Additive
UP
Formula OAT (Organic Additive
CAUTION!