Towing Tips - Jeep WRANGLER 2020 Owner's Manual

196 STARTING AND OPERATING
T T
OWING IPS
Before setting out on a trip, practice turning,
stopping and backing the trailer in an area away
from heavy traffic.
Automatic Transmission
Select the DRIVE range when towing. The
transmission controls include a drive strategy to
avoid frequent shifting when towing. However, if
frequent shifting does occur while in DRIVE, you
can use the AutoStick shift control to manually
select a lower gear.
NOTE:
Using a lower gear while operating the vehicle
under heavy loading conditions, will improve
performance and extend transmission life by
reducing excessive shifting and heat buildup.
This action will also provide better engine
braking.
AutoStick — If Equipped
When using the AutoStick shift control, select

the highest gear that allows for adequate
performance and avoid frequent downshifts.
For example, choose "5" if the desired speed
can be maintained. Choose "4" or "3" if
needed to maintain the desired speed.
To prevent excess heat generation, avoid

continuous driving at high RPM. Reduce
vehicle speed as necessary to avoid
extended driving at high RPM. Return to a
higher gear or vehicle speed when grade and
road conditions allow.
Cruise Control — If Equipped
Do not use in hilly terrain or with heavy loads.

When using the Cruise Control, if you experi-

ence speed drops greater than 10 mph
(16 km/h), disengage until you can get back
to cruising speed.
Use Cruise Control in flat terrain and with

light loads to maximize fuel efficiency.