Jack Location; Spare Tire Removal - Jeep WRANGLER 2020 Owner's Manual

330 IN CASE OF EMERGENCY
J L
ACK OCATION
The jack and lug wrench are located in the rear
cargo area. To remove jack and tools proceed
as follows:
1. Lift the load floor in the cargo area.
Load Floor
NOTE:
The load floor can be removed for easier access
by pulling the load floor directly rearward.
2. Remove the hardware storage cover by
pinching the latch on the left side and
pulling upward.
Hardware Storage Cover Latch
3. Turn the plastic wing nut counterclockwise
to loosen the jack from the storage bin.
Plastic Wing Nut Location
4. Remove tool kit and assemble tools.
S T R
PARE IRE EMOVAL
1. To remove the spare tire from the carrier,
remove the tire cover, if equipped.
NOTE:
The spare wheel is mounted on the outside of
the tailgate, protected by a plastic cover with
fasteners. Under traffic regulations, the cover
must not be removed or insecurely fixed during
use of the vehicle on the public highway. Refer-
ence should be made to local laws and regula-
tions. If the spare wheel is used, before
continuing your journey check that the
damaged wheel is securely mounted and the
cover is correctly fixed in place. Also take care
not to obstruct the rear camera
2. Remove the Rear Camera Cover by turning
the lock bolt counterclockwise with the
#T40 torx head driver and ratchet from the
supplied tool kit.