Jeep WRANGLER 2020 Owner's Manual page 483

Apps Menu Screen
Power Flow
The first screen within the "Hybrid Electric
Pages" App is the Power Flow screen. The Power
Flow screen shows the current power readings
for all of the following:
Engine - Shows the amount of power (in kW)

the engine is generating. Based on vehicle
operating conditions, this power is used to:
propel the vehicle, provide passenger
compartment heating, power vehicle elec-
trical loads, and charge the high voltage
battery. Engine operation is controlled to
maximize fuel economy.
Battery - Shows the amount of power (in kW)

the high voltage battery is currently
providing/absorbing. A negative kW indicates
the vehicle's high voltage battery is charging.
Climate - Shows the amount of power (in kW)

the Climate Control system is using to main-
tain the current interior temperature.
Power Flow Screen
Power Flow paths are indicated by the direction
of the arrows on the touchscreen.
Driving History
The second screen in the "Hybrid Electric
Pages" App is the Driving History screen. The
Driving History screen shows the miles (km)
driven in both Full Electric and Hybrid modes for
both the previous week and the current week.
The data is displayed in a bar graph: miles
GETTING TO KNOW YOUR VEHICLE
driven in Electric Mode displayed in green, and
miles driven using the gas engine (Hybrid Mode)
in tan.
On the bar graph, miles (km) driven on the same
day in Electric mode (battery only) are always
shown below miles (km) driven in Hybrid mode
(using the gas engine). When one day of the
week exceeds 100 miles (160 km) driven, the
values of miles (km) driven in Electric and
Hybrid modes will be listed above the bar graph
in respective colors (green for Electric and tan
for Hybrid).
Driving History Screen
Charging Schedule
The third screen within the "Hybrid Electric
Pages" App is the "Charging Schedule" screen.
From this screen, you can set when you want
21
2