Jeep WRANGLER 2020 Owner's Manual page 486

24 GETTING TO KNOW YOUR VEHICLE
remains in the vehicle or is removed. The horn
will sound three times if the fob is removed from
the vehicle and the ignition state is in READY
mode. To restart the vehicle, follow the normal
process for starting your vehicle.
The Keyless Push Button Ignition has several
operating modes that are labeled and will
illuminate when in position. These modes are
OFF, ACC, RUN, and START.
NOTE:
Pushing the START/STOP ignition button may

only activate the Electric Propulsion System
and not start the vehicle's engine (if running
the engine is not currently required by the
Hybrid system). READY will show in instru-
ment cluster display whenever the vehicle is
operating in Electric-only (EV) mode and the
vehicle is stationary.
If the vehicle's ignition is in either ACC or

RUN, the vehicle charge indicator may not
display a value greater than 99% state of
charge due to vehicle loads.
Keyless Push Button Ignition
1 — OFF
2 — ACC
3 — RUN
The ignition can be placed in the following
positions:
OFF
The vehicle is stopped

Some electrical devices are available

ACC
Some electrical devices are available

Mechanical power (Vehicle Propulsion) is not

available
RUN
Driving position

All the electrical devices are available

As long as READY appears in the instrument

cluster display, it does not matter if the
engine is running or not, vehicle propulsion is
available
START
The vehicle will start

NOTE:
Vehicle propulsion is only available after the
vehicle has passed through the START position.
Conditions Which May Cause The Engine To
Run
When the Hybrid Battery State of Charge

(SOC) has reached <1%
When applying maximum vehicle accelera-

tion
While maintaining the Exhaust System Cata-

lyst Temperature in Hybrid or E-Save modes
When the hood is open with the ignition in

RUN, post-START mode