Jeep WRANGLER 2020 Owner's Manual page 19

1 — Mechanical Key Release Button
2 — LED Light
3 — Unlock Button
4 — Lock Button
5 — Remote Start
NOTE:
In case the ignition switch does not change

with the push of a button, the key fob may
have a low or fully depleted battery. A low key
fob battery condition may be indicated by a
message in the instrument cluster display, or
by the LED light on the key fob. If the LED key
fob light no longer illuminates from key fob
button pushes, then the key fob battery
requires replacement.
Improper disposal of key fob batteries may

be harmful to the environment. Please see
an authorized dealer for proper battery
disposal.
To Lock/Unlock The Doors And Swing Gate
Push and release the unlock button on the key
fob once to unlock the driver's door, or twice to
unlock all the doors and swing gate. To lock all
the doors, push the lock button once.
Key Fob
GETTING TO KNOW YOUR VEHICLE
When the doors are unlocked, the turn signals
will flash and the illuminated entry system will
be activated. When the doors are locked, the
turn signals will flash and the horn will chirp.
NOTE:
All doors can be programmed to unlock on the
first push of the unlock button through the
Uconnect Settings Ú page 209.
Replacing The Battery In The Key Fob
The recommended replacement battery is
CR2450.
NOTE:
Customers are recommended to use a

battery obtained from Mopar®. Aftermarket
coin battery dimensions may not meet the
original OEM coin battery dimensions.
Perchlorate Material — special handling may

apply.
Do not touch the battery terminals that are

on the back housing or the printed circuit
board.
When a key fob battery is low, a warning will

be indicated on the vehicle's instrument
cluster, and the fob LED will no longer illumi-
nate with a button press.
17
2