Realigning The Heads After Clutch Separation - Honeywell Precision Platform 4022 Series System Manual

Precision Platform 4022 Scanner

9.9.2. Realigning the heads after clutch separation

9-40
Figure 9-9 Head Separation Clutch Controls
1. Manually pull the upper head over the lower head to align the
heads (approximate alignment is OK).
2. Engage the clutch by turning the Head Split keyswitch off (see
Figure 9-9).
3. Move the upper head back and forth in the CD direction to ensure
that the clutch is engaged. Both heads will move when clutch
engagement is completed.
4. Restore power to the drive motor using the Motor Power keyswitch
(see Figure 9-9).
5. Record the maintenance in the scanner logbook.
10/18/07
Scanner Maintenance
p/n: 6510020208