Termination Board Connectors And Signals - Honeywell Precision Platform 4022 Series System Manual

Precision Platform 4022 Scanner
6.3.1.2.
6-14
Switches
S1 Up: Manual mode
Down: Computer mode
S2 Computer mode: Scan
Manual mode: Forward
S3 Computer mode: Offsheet
Manual mode: Reverse
Table 6-5 Termination Board Fuses
Fuse Termination Board
(4022-30 and 4022-31)
F1 6A - 24V electric
F2 6A - 24V solenoid
F3 10A - 24V Auxiliary
F4 10A - 24V electric; Upper power track
F5 10A - 24V electric; Lower power track
F6 10A - 24V solenoid; Upper power track
F7 10A - 24V solenoid; Lower power track

Termination board connectors and signals

There are several connectors on the Termination PCB. Many of the
connectors are of different types, reducing the possibility that a cable will
be installed incorrectly. Table 6-6 details all of the signals connected to the
Termination PCB except for the power track.
Table 6-6 Termination PCB signals
Terminal
AC Power
J9-1
J9-2
J9-3
J9-4
J9-5
J9-6
J9-7
Cable End Electrical Assemblies and Precision Measurement Processor
Termination Board
(4022-30 and 4022-31)
Termination Board
(4022-30 and 4022-31)
56 VAC Air Gap & Trim
56 VAC Air Gap & Trim
56 VAC Air Gap & Trim
56 VAC Air Gap & Trim Return
56 VAC Air Gap & Trim Return
56 VAC Air Gap & Trim Return
56 VAC Sheet Guide
10/18/07 p/n 6510020208