Solutions For Condensation Problems; Connecting External Coolant Fluid; Figure 3-3 Air And Coolant Distribution At The Precisionpak - Honeywell Precision Platform 4022 Series System Manual

Installation

3.8.3. Solutions for condensation problems

3.9. Connecting external coolant fluid

p/n 6510020208

Figure 3-3 Air and Coolant Distribution at the PrecisionPak

If the purge air cools the beam too much and condensation forms on the
scanner covers, reduce the air flow from the blower using the damper
until the condensation is reduced to an acceptable level (non-dripping) or
increase supply air temperature.
If the supply source for cooling fluid to the heads has not yet been
determined, see Chapter 2 for requirements.
10/4/07
Connecting external coolant fluid
3-13