Table of Contents
Advertisement
Site Preparation
WARNING
2.15.
Scheduling Installation Personnel
2.15.1.
p/n 6510020208
The basis weight or nuclear sensor contains a radioactive source
(KR-85, SR-90, AM-241, or PM-147). OEMs or end users who will
conduct basis weight sensor installations, required safety tests,
repairs, etc., are required to obtain a radioactive materials license
that explicitly authorizes the operations to be conducted and names
the individuals who may perform them. Otherwise, operations of
the type listed above must be performed by authorized Honeywell
employees or other appropriately-licensed individuals, or as
described in the Customer Radiation Safety Training Manual
6510020197.
:
Ash sensors contain X-ray sources that produce intense levels of
X-radiation when power is applied to the X-ray tube. Personnel
who work on or with X-ray sources must be knowledgeable of and
trained in the proper safety methods for X-ray devices. In most
locations, a permit or registration is required to maintain, service,
and install X-ray devices.
Failure to follow radiation safety procedures MAY cause exposure
to hazardous levels of radiation.
Honeywell recommends that a variety of maintenance actions be
performed at daily, weekly, monthly, and other intervals. Government
regulations in the U.S. require certain tests to be performed at specified
intervals.
Installation procedures and tests involving nuclear and X-ray sensors
must be performed by licensed personnel only.
Scheduling installation personnel to set
Precision Platform setup parameters
The Da Vinci Application Server software includes parameters that
control scanning operations. When a Precision Platform is shipped, these
parameters are set to Honeywell defaults. These parameter settings can be
10/4/07
Scheduling Installation Personnel
2-29
Hide quick links:
Advertisement
Table of Contents
