Presentation Led Behavior After Decode; Presentation Sensitivity; Presentation Centering - Honeywell HF52X User Manual

Fixed mount barcode scanner

Table of Contents

Presentation LED Behavior after Decode

When a scan engine is in presentation mode, the LEDs dim 30 seconds after a bar

code is decoded. If you wish to dim the LEDs immediately after a bar code is

decoded, scan the LEDs Off bar code, below. Default = LEDs On.

Presentation Sensitivity is a numeric range that increases or decreases the scan

engine's reaction time to bar code presentation. To set the sensitivity, scan the

Sensitivity bar code, then scan the degree of sensitivity (from 0-20) from the

inside back cover, and Save. 0 is the most sensitive setting, and 20 is the least sen-

sitive. Default = 1.

Use Presentation Centering to narrow the scanner's field of view when it is in the

stand to make sure the scanner reads only those bar codes intended by the user.

For instance, if multiple codes are placed closely together, Presentation Centering

will insure that only the desired codes are read.

Note: To adjust centering when the scanner is hand-held, see

If a bar code is not touched by a predefined window, it will not be decoded or output

by the scanner. If Presentation Centering is turned on by scanning Presentation

Centering On, the scanner only reads codes that pass through the centering win-

dow you specify using the Top of Presentation Centering Window, Bottom of

Presentation Centering Window, Left, and Right of Presentation Centering Win-

dow bar codes.

In the example below, the white box is the centering window. The centering window

has been set to 20% left, 30% right, 8% top, and 25% bottom. Since Bar Code 1

passes through the centering window, it will be read. Bar Code 2 does not pass

through the centering window, so it will not be read.

HF52X Fix Mount Barcode Scanner User Guide

* LEDs On

Sensitivity

Centering

LEDs Off

(page 3-43).

Table of Contents