Lifting, Placing, Leveling And Bolting Down The Precision Platform; Figure 3-1 Lifting The 4022 Precision Platform - Honeywell Precision Platform 4022 Series System Manual

Installation
3.6. Lifting, placing, leveling and bolting down the
Precision Platform
WARNING
p/n 6510020208

Figure 3-1 Lifting the 4022 Precision Platform

1. Lift the scanner from the shipping dollies and position it as directly
above the mounting pedestals as possible.
When the scanner is lifted, the vertical angles of the scanner and
the lifting cables must never exceed the angles that were
:
anticipated when the scanner was initially attached to the crane.
Any angle farther off the vertical than anticipated could cause the
eyebolts or other elements to fail or slip.
2. Lower the scanner onto the pedestal.
3. Place string between the two turn rolls on either side of the scanner
and pull it tight to simulate the paper path.

Lifting, placing, leveling and bolting down the Precision Platform

10/4/07
3-7