Recommended Rf Connector For Installation; Assemble Coaxial Cable Plug Manually - Quectel RM502Q-GL Hardware Design

5G Module Series
RM502Q-GL Hardware Design
The following figure illustrates the connection between the receptacle RF connector on RM502Q-GL and
the mating plug using a Ø 1.13 mm coaxial cable.
Figure 32: Connection between RF Connector and Mating Plug Using Ø 1.13 mm Coaxial Cable

5.3.4. Recommended RF Connector for Installation

5.3.4.1. Assemble Coaxial Cable Plug Manually

The pictures for plugging in a coaxial cable plug is shown below, θ = 90° is acceptable, while θ ≠ 90° is
not.
Figure 33: Plug in a Coaxial Cable Plug
RM502Q-GL_Hardware_Design 67 / 83