Recommended Rf Connector For Antenna Installation - Quectel SC606T Series Hardware Design

Wi-Fi/BT
1)
GNSS
NOTE
1)
As the harmonics generated by LTE B13 and B14 may saturate the LNA of active antennas, it is
recommended to use the passive antenna in such networks.

6.4.2. Recommended RF Connector for Antenna Installation

If an RF connector is used for antenna connection, it is recommended to use the U.FL-R-SMT connector
provided by HIROSE.
SC606T_Series_Hardware_Design
Polarization Type: Vertical
Cable Insertion Loss: < 1 dB
(GSM850, EGSM900, WCDMA B5/B6/B8/B19,
LTE B5/B8/B12/B13/B14/B17/B18/B19/B20/B26/B28A/B28B/B71)
Cable Insertion Loss: < 1.5 dB
(DCS1800, PCS1900, WCDMA B1/B2/B4,
LTE B1/B2/B3/B4/B11/B21/B25/B34/B39/B66)
Cable Insertion Loss: < 2 dB (LTE-FDD B7, LTE-TDD B38/B40/B41)
VSWR: ≤ 2
Gain (dBi): 1
Max Input Power (W): 50
Input Impedance (Ω): 50
Polarization Type: Vertical
Cable Insertion Loss: < 1 dB
Frequency range: 1559–1609 MHz
Polarization: RHCP or linear
VSWR: < 2 (Typ.)
Passive Antenna Gain: > 0 dBi
Active Antenna Noise Figure: <1.5 dB (Typ.)
Active Antenna Gain: > -2 dBi
Active Antenna Embedded LNA Gain: < 17 dB (Typ.)
Active Antenna Total Gain: < 17 dBi (Typ.)
Smart Module Series
SC606T Series Hardware Design
87 / 116